Manual airlogOne / airlogOne-mini

Get started with your new airlogOne

When you unbox your new airlogOne, you will find the device,
a printed quick start guide, a USB-C cable and the important
Login Card. This card holds the unique login credentials for You and your device, both sharing access to your data in the firebase cloud storage.  
Your digital logbook, all your detailed tracks and the complete device configuration is stored here.

This is the detailed and current manual. It represents the current Software version.

airlogOne and airlogOne-mini share the same features and the same manual; only the part “truemotion sensor” is only available for the airlogOne.

Lets go!

SW Version: V1.62 + V2.0

quick user guide

what you need to know to use your airlogOne

start the device

Make sure the airlogOne is sufficiently charged (minimum 15 minutes powered on the USB port, or charged beforehand).

Press the left button marked “M” briefly. The blue LED will light up, and the unit will begin clearing the screen and starting a self-test procedure.

After initializing the GNSS system (GPS), it waits to receive at least 4 satellites for a complete GPS 3D fix. As a GPS tracker, good GPS reception is fundamentally important. It helps to be near a window or outside with a clear sky view.

If you don’t want to wait, press the middle button for about 2 seconds to skip this wait. The device will start and display the normal screen.
It will still attempt to find enough satellites and will show either the “no GPS” or “fix” sign.

config the device

Make sure the airlogOne is sufficiently charged (minimum 15 minutes powered on the USB port, or charged beforehand).

Press the left button marked “M” briefly. The blue LED will light up, and the unit will begin clearing the screen and starting a self-test procedure.

After initializing the GNSS system (GPS), it waits to receive at least 4 satellites for a complete GPS 3D fix. As a GPS tracker, good GPS reception is fundamentally important. It helps to be near a window or outside with a clear sky view.

If you don’t want to wait, press the middle button for about 2 seconds to skip this wait. The device will start and display the normal screen.
It will still attempt to find enough satellites and will show either the “no GPS” or “fix” sign.